Tile Bond™
Formulated to fight off the weather
Whether for repairs or a new roof, Tile Bond™ Roof Adhesive attaches clay and concrete roof tiles efficiently and with strength to last. Approved for building codes in hurricane zones, Tile Bond™ is also economical --- yielding up to 350 tiles per 23-pound tank.
Tile Bond™
Tile Bond™ Roof Tile Adhesive is a portable one-component polyurethane foam adhesive for attaching concrete and clay roof tiles. Packaged in a self-contained disposable can or canister, it is quicker and easier to install compared to traditional attachment methods such as screws, mortar, wire ties and clips. Minimal expanding Tile Bond™ also provides greater attachment strength while minimizing nail penetrations and reducing roof weight loads.
Features & benefits
| High yield |
|
| Restartability |
|
| Easy-to-use packaging |
|
| Moisture-cured |
|
Physical Properties
| Method | Unit | Value | |
|---|---|---|---|
| Compressive Strength<sup>2</sup> | ASTM D1621 | psi, min. | 14.3 |
| Water Absorption<sup></sup> | ASTM D2842 | % by volume, max. | 2.2 |
| Water Vapor Permeance<sup>3</sup> | ASTM E96 | perm, max | 3 |
| Tensile Strength<sup></sup> | ASTM D1623 | psi @ 180°F, 65% RH for 120 days, concrete to concrete | 31.2 |
| Density<sup></sup> | ASTM D1622 | lb/ft3 | 1.8 |
| Closed Cell Content<sup></sup> | ASTM D2856 | % | 86.3 |
| Working/Open<sup>4</sup> | - | - | Set tile within adhesive pad within 4 minutes of dispensing |
Available Sizes
| Width | Length | Packaging | Dispensing method |
|---|---|---|---|
| 0 | 0 | Each | Hose / Wand |
| 0 | 0 | Each | Reusable Straw |
Download product info and installation guides
See it in action
© 2022 DuPont de Nemours, Inc. All rights reserved. DuPont™, the DuPont Oval Logo, and all products, unless otherwise noted, denoted with ™, ℠ or ® are trademarks, service marks or registered trademarks of affiliates of DuPont de Nemours, Inc.